• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

wast pipe on Bailey ranger 460/4 2007

S

Stephen_374341239

Hi

I am trying to fit al-ko jacking brackets on my van.

But have come up with a problem the wast pipes are too close to the point where the bracket is fitted to the chassis. Does anybody know if the ridged wast pipes are just push-fit or are they glued together?

Regards steve
 
Hi Steven

Not sure about the pipes but I had trouble with my Pageant 2007. A pipe was in the way of one bracket, right on the bend, I called Al-ko and after much discussion they agreed the bracket could be cut to the absolute minimum necessary for it to fit without disturbinig the pipe. I also talked to my caravan dealer who was going to put a query in with Bailey.

Thought this might help

Mike
 
Hi Steven,

On my 2003 Pageant Imperial the waste pipe from the kitchen sink is only push fit. The joint keeps coming apart, so I will be gluing mine together. i would get underneath and try and pull / twist them apart. You can't do any damage, I hope this helps you.
 
Thank you

Now I know they're push fit. I can make the small adjustment to one of the pipes so it will allow me to fit the jacking bracket behind it.

Many thanks for your HELP.
 
Thank you

Now I know they're push fit. I can make the small adjustment to one of the pipes so it will allow me to fit the jacking bracket behind it.

Many thanks for your HELP.
Click to expand...
No need to be gentle with them
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top