Hi there, my alko system does not start up when hooked up. Unfortunately the cable came loose white touring and the cable was damaged. Although the wiring was re joined by an electrician and when hooked up to car no alko noise nor red or green led light came on. However, all the lights indicators, emergency, right and left indicator brake, lights and reverse light working fine. So it's only the alko system not firing up. How does one reset the alko system? Please help.
-
We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.
Alko system not working
- Thread starter Sage0413
- Start date
When that wire was damaged, it could have blown the fuse in the car for the permanent 12v supply.
Rule that out first
Rule that out first
But if there is power for all the lights working indicator, reverse, brakes, just not alko is this a separate fuse?
Should have a separate fuse, that wire is basically a direct connection to the vehicle battery and deliberately separate from all the others
The Alko uses the permanent 12v supply cable and its associated earth return - the road lighting uses different cables within the thick connecting cable, including their associated earth return.
You, or your electrician, need to start by checking the permanent 12v supply at the car socket - Pin 4 (green cable) if it's 12S socket or pin 9 (orange cable) if its 13-pin socket
Ok thanks I willcheck if the fuse is blown
A;lso check the lead from the Alko light,, ours stopped working and needed new led which comes with a new lead
